Crivit DS-1532 Manuel d'utilisateur télécharger pdf (Page 52)

52

• The external connection cable from this

transformer cannot be substituted; if the

cable is damaged, the transformer will

have to be scrapped.

Assembly instructions

Assembly of the dartboard

(Illustration B, C)

• Select a suitable position with approx. 3m

free space around it.

• The ‘scratch line’ must be at a distance of

2.37m from the dartboard. Fix the dart

board to the wall so that the centre of the

Bullseye is at a height of 1.73m above

the ground.

• Using the enclosed drilling template, mark

the respective drill holes with a pencil. The

markings “+”indicate the direction to

mount the dartboard in. The markings

“O” indicate openings on the dartboard

for permanent wall mounting. Mount the

dartboard using either the mounting de-

vice (3 screws) or permanent wall moun-

ting (4 screws). The cross at the centre of

the drill template indicates the position of

the bullseye on the dartboard. Then

mount the dartboard using the included

screws and wall plugs.

Assembly of the darts

(Illustration D)

Screw the tip and shaft together as indica-

ted into the grip and insert the unfolded

ﬂight into the cross-slots.

Avoiding material damage!

• Use exclusively proper original replace-

ment tips, in order to avoid the darts

ricocheting oﬀ the dartboard. We strongly

recommend you do not use long tips for

electronic dartboards. They quickly buck-

le and easily break (Removing broken-oﬀ

tips from the dartboard – Trouble-

shooting, page 63 - 64).

• Do not allow the item to be exposed to

extreme weather conditions and tempera-

tures.

• Protect the item from moisture and damp-

ness. The electronics could be damaged.

Safety instructions power

adapter

ATTENTION!

Important information for use of the

adapter!

Note: The device gets warm during

normal use.

• Only use the adapter in connection with

the Dartboard DS-1532.

• Only use the supplied adapter!

• Only use original spare parts in the event

of a defect!

• First unplug the adapter from the wall

socket before disconnecting the adapter

from the dartboard.

• The adapter is suitable for indoor use

only. Keep away from moisture.

• If the housing or the power lead of the

device is damaged, discontinue using the

adapter.

• Disconnect the device from the mains if

not used over a longer period of time.

• The mains output line is not allowed to be

short-circuited.

GB/MT

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 81 82

Commentaires sur ces manuels

Pas de commentaire